CV6400 Non Code Wet/Dry Vac 
Standard Unit Configuration

Base Model - Unit displayed above may differ for the standard configurations.
Please contact a sales representative for more details about the unit listed above.

Design: Vacuum debris tank shall withstand 14.9 PSI Internal Pressure and 15 PSI External pressure (full vacuum) UNIT NOT FOR TDG!

Contact Leasing Agent


CV6400 Non Code Wet/Dry Vac  - Standard Unit Configuration

Derbris Compartment:

  • Diameter 78" x 11' seam to seam
  • Capacity 11 cubes ( 2420 Imp Gal )
  • 78" x 5/8" rear plate
  • Two 7816' head
  • 78" x 3/" x 5/16"x 6' shells
  • Preformed tank pedestals
  • Liquid level indicator D/S
  • Hydraulic lifr rear ( door) gate mechanism
  • 4" Heated Brass manual gate valve
  • 6" Heated Brass manual gate valve
  • Ladder c/w step platform D/S at rear of tank for boom access
  • Dig tube holders off of P/S rear door


  • Robuschi RB-DV 145 ( 6400 CFM ) free air rating @ 27" Hg maximum
  • Vacuum. Blower equipped with low noise discharge manifold

Blower Drive:

  • Transfer case drive with air shift engagement mounted in truck driveline
  • Driveline modifications as required

Hydraulic System:

  • 8 Bolt PTO
  • Tandem gear pump
  • Spool type valve control
  • Rear control bank for rear gate
  • 40 Gallon oil tank c/w vent,site glass filters, temperature gauge, and inspection hatch  
  • 12 volt oil cooler
  • 3 Stage d/a hoist cylinder

Primary Shut-Off:

  • Daul heavy duty internal shut-offs with 12" S.S. float ball/cage assembly and 8" Turbo boot and Dual 8" flanged outlets
  • Dual 8" isolation valves air actuated with switches at operator station


  • 12" piping from prestage to cyclones c/w 8" oil and gas loop hose

Vacuum Breakers:

  • Four vacuum breakers installed on cyclone plumbing D/S

Isolation Valves:

  • One 6" air actuated valve between cyclone and prestage to isolate cyclones for dry mode


  • One 12" exhaust silencer, One intake silencer in Horizontal mount configuration

Filtration System:

  • Dual high efficiency cyclones mounted on drivers side of unit with 20" drop box assembly and swing out cleanout doors ,3" brass manual drain valves with camlock fittings
  • Prestage filter housing c/w 20" diameter washable inline S.S./fiber filter element,

Baghouse Assembly:

  • Dual cylindrical 1/4" steel construction witrh 1.2 cube capacity
  • Top door hinged access
  • Each baghouse c/w 30 Acrylic coated filter bags
  • Filters cleaned automatically with a timed air blaster assembly
  • 4" cleanouts Caped  at bottom of each  baghouse


  • Global vibrator assembly mounted bottom of tank on reinforcement pad HD
  • Channel and pressure relief valve

Pressure Relief:

  • One 3" x 15 PSI relief vent

Frame,Deck And Allied Equuipment:

  • Full length subframe c/w 1/8: checker plate, hose tray/fender assembly,
  • Heavy durt outrigger supports, 1 1/4" thube handrails,close in plate Standard rear
  • bumper with lightboxes module and rear tire skirt
  • Subframe supports decking,rear hoist hinges & front hoist cradle

Hydraulic Boom:

  • One 8" x 270 deg. Telescopic suction boom mounted top rear of debris tank
  • 8' Boom Hose c/w aluminum adapter end
  • One wireless remote control
  • One Hard wired pendant control c/w cable and plug in


  • Gauge assembly with tank vacuum/pressure gauge, hydraulic pressure gauges.  Blower temperature gauge - remote mounted on D/S.


  • 50' ground cable assembly wind up style

Electrical System:

  • Waterproof main circuit control box - self contained power supply.
  • Sealed wire harness c/w waterproof junction boxes.
  • L.E.D. lamps (Clearance, park, signal).
  • Sealed L.E.D. reverse lamps.
  • Four L.E.D.  work lights
  • Lights are dual revolution and all red lights turn white when in reverse
  • Electrical system shut-down at key.
  • Sealed rear skirt lamp modules.
  • Stop and turn L.E.D sealed lamp modules on top ring of door.
  • Back up alarm


  • Standard non code rear bumper


  • The entire tank and body of vacuum system shall be sandblasted, primed
  • and painted with Endura paint. Color to meet company fleet color    

Additional Equipment:

  • PTO Hour meter installed in truck cab
  • 30# fire extinguisher/Brkt/Cover
  • Mudflaps
  • Boom cradle top of tank &  hose holders P/S
  • Chain hanger slide out style

Other Items:

  • Operators manual
  • National Safety Mark
  • One Year Standard Manufactures Ltd Warranty


  • Complete system installed on Customer Supplied Tandem axle truck chassis.

Oil River Equipment Inc.

Vacuum Truck Rental information
Call: 780-979-0669


© 2018 - Oil River Equipment Inc. 1807- 4A St. Nisku, Alberta. Canada T9E 7V3