HYDRO EXCAVATOR


CV6400 (Unit not for TDG)
  • Tank Capacity 8 cubes (1816 US gal)
  • Water Compartment 5 Cubes (1320 US gal)
  • One 8' x 25' reach telescoping boom with 270 degree rotation
  • All valves are coded compliant full open hydraulic rear door
  • Hibon SIAV 822 blower 2650 CFM, 27 Hg max vacuum

Wash system

  • Wash system c/w cat 3560 triplex plunger pump
  • Hotshot 120 volt heater 980,000 BTU/hr
  • Hydraulic hose reels
  • Degreaser system
  • All equipment enclosed inside an insulated, heated aluminum enclosure
  • Code rear bumper and national safety mark

Contact Leasing Agent

Hydro-Excavator CV6400 (Unit not for TDG)


DESIGN: Vacuum debris tank shall withstand 14.9 PSI Internal Pressure and 15 PSI external Pressure (full vacuum)

UNIT NOT FOR TDG

Debris Compartment:

  • Tank diameter 78" x 8' seam to seam
  • Tank capacity 8 cubes
  • 78" x 5/16" heads
  • 78" x 5/16" shells
  • Formed tank pedestals
  • liquid level indicator D/S
  • 6" Load manual valve c/w 6" sandpipe, aluminum camlock/cap
  • 4" Load manual valve,
  • Hydraulic Lift rear gate mechanism.
  • All rear valves heated, and equipped with air/open- spring/close air actuators
  • Separate control switches

Water Compartment:

  • 5 Cubes (1100 Imp Gal)
  • 20" Manway
  • Stainless steel liquid level indicator with grab handle P/S
  • 2' heated fill port c/w riser/vent pipe
  • 2" heated Drain Valve c/w butterfly valve
  • 2" heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
  • 2" heated isolation valve between debris and water tank c/w control switch at operator station 

Vibrator:

  • Global hydraulic vibrator assembly mounted on bottom of tank with reinforcement pads, heavy duty mounting channel and pressure relief valve.

Pressure Relief:

  • One 3" x 15 psi relief located top front of debris tank
  • 2" vacuum breakers installed on exhaust silencer

Gauges:

  • Gauge assembly with tank vacuum/pressure gauge, hydraulic pressure gauges. 
  • Blower temperature gauge - remote mounted on D/S.

Blower Specifications:

  • 5 Cubes (1100 Imp Gal)
  • 20" Manway
  • Stainless steel liquid level indicator with grab handle P/S
  • 2' heated fill port c/w riser/vent pipe
  • 2" heated Drain Valve c/w butterfly valve
  • 2" heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
  • 2" heated isolation valve between debris and water tank c/w control switch at operator station   
  • Blower Drive:
  • Transfer case drive with air shift engagement mounted in truck driveline.
  • Driveline modifications as required

Primary Shut-Offs:

  • Dual heavy duty internal shut-offs with 12" S.S. float ball/cage assembly and 8" Neoprene seats.  
  • Dual 8" diameter flanged outlets.
  • Dual 8" isolation valves air actuated with switches at operator station

Plumbing:

  • 8" piping c/w 8" oil & gas loop hose
  • Filtration System:
  • Dual high efficiency cyclones mounted on D/S of unit with 20" diameter drop box assembly with side swing cleanout doors
  • 3" brass drain valves and aluminum camlok fittings.
  • Two 20" diameter washable inline S.S./fiber filter element, 20 micron rating for protection of blower.

Silencers:

  • One 12" exhaust silencer, One 12" cooling intake silencers in horizontal mount configuration  

Hydraulic System (Linde-closed loop design):

  • 8 Bolt PTO
  • Hydraulic pump and motor for wash pump
  • Tandem gear pump for boom and auxiliary functions
  • Spool type valve control for pump and allied functions
  • Rear control bank for rear gate
  • 90 gallon oil tank c/w vent, site glass, filters, temperature gauge, and inspection hatch
  • 12 volt oil coolers
  • 3 stage hydraulic hoist cylinder

Hydraulic Boom:

  • One New Style 8" x 270 deg. telescopic suction boom mounted top rear of tank
  • 8" boom hose
  • One wireless remote control, functions include on/off for wash pump
  • Standard hard wire pendant control and plug (for back up)

Wash System:

  • Cat 3560 Triplex plunger pump rated 20gpm@ 4000 psi
  • 2" Y strainer, 1" high pressure Baird relief valve,
  • Three Hydraulic Rewind Reels
  • 100' x 1/2" pressure hose
  • 100' x 3/8 temperature rated Steam hose
  • Degreaser assembly c/w trigger gun, wand, nozzle, pump, degreaser hose

Wash Accessories:

  • One wash gun, wand, nozzle and quick coupler
  • One steam wand, nozzle and quick coupler
  • One 6' hydro exposing wand c/w 4' extension, high pressure ball
  • Valve and turbo nozzle

Hot Water System:

  • Hotshot 980,000 BTU/hr. heater c/e relief valves, temperature gauge Honeywell control and Diagnostic panel
  • Safety Feature: a 340 deg. Auto Shut-Off for heater system
  • New style 18 GPM solid brass flow switch with no bypass line
  • 3000 Watt Inverter
  • Wet Steam kit plumbed with high pressure ball valves

Wash Cabinet:

  • Milron 54" aluminum insulated cabinet c/w large door D/S
  •  Small access door in large door P/S for hose access
  • Two heaters, LED Lights, and Automatic Vent

Frame, Deck And Allied Equipment:

  • Full length sub frame c/w 1/8" checker plate hose tray/fender assembly
  • c/w heavy duty outrigger supports, 1-1/4" tube handrails, close in plate.
  • Standard rear bumper with light boxes and rear tire skirt
  • Sub frame supports decking, rear hoist hinges front hoist cradle

Cabinets:

  • One steel three door deck box
  • Two rear skirt fitting boxes

Electrical System:

  • Waterproof main circuit control box - self contained power supply.
  • Sealed wire harness c/w waterproof junction boxes.
  • L.E.D. lamps (Clearance, park, signal).
  • Sealed L.E.D. reverse lamps.
  • Four L.E.D. work lights
  • Three L.E.D.; lights on boom
  • Electrical system shut-down at key.
  • Sealed rear skirt lamp modules.
  • Stop and turn L.E.D sealed lamp modules on top ring of door.
  • Back up alarm.
  • Deck mount blower control switch

Other Items:

  • Catwalk & back rail (with safety tie off rings), on upper suction pipe driver's side.
  • PTO Hour meter installed in truck cab
  • Chain hanger, slide out style
  • Mud flaps
  • 50' ground cable ( wind up style )
  • 30# fire extinguisher/Brkt/Cover
  • Boom hose holders P/S
  • One 8" x 6" x 4' aluminum adapter/Band clamp ends
  • Two 6" x 6' Aluminum dig tubes/band clamp ends, One with neoprene tip
  • Dig tube holder
  • Operators manual
  • National Safety Mark
  • One Year Standard Manufactures Ltd Warranty

Paint:

  • painted with Endura paint

Installation:

  • Complete system installed on Tri-drive truck chassis

Oil River Equipment Inc.

Vacuum Truck Rental information
Call: 780-979-0669

 

© 2018 - Oil River Equipment Inc. 1807- 4A St. Nisku, Alberta. Canada T9E 7V3